Crystal porcelain beautiful seam
Hangzhou River Golden Squirrel ? Jingci Meisew is a two-component epoxy resin type building joint filling product, suitable for bonding, sealing, waterproofing, and joint closing at the interface of materials such as ceramics, stones, aluminum plastic plates, etc. It is particularly suitable for sealing the joints of ceramic wall and floor tiles, kitchen and bathroom fixtures.
Product features
1. Non flowing, suitable for filling gaps in planes and facades;
2. The product has a fast curing speed, which can be surface dried in about 1-2 hours and completely cured in about a day;
3. After solidification, it has high hardness and good wear resistance, and has strong adhesion ability to substrates such as ceramic tiles, quartz bricks, and glass bricks. The appearance effect is long-lasting, and the colloid does not collapse, shrink, or crack;
4. Dense surface with low water absorption; Acid and alkali resistant chemical corrosion; Resistant to moisture, dirt, and mold;
5. Adopting high-end pigments and fillers, with a wide range of color and appearance options to meet personalized and customized needs;
6. The product meets the French A+environmental protection level requirements, is free of formaldehyde, benzene, and heavy metals, and does not cause harm to people and the environment.
| Performance | Lndicators |
| Density(g/cm³) | 1.4 |
| Solids(%) | 88 |
| Sag(mm) | 0 |
| Surface drying time(min) | 90 |
| Operable time(min) | 35 |
| Tensile shear strength(MPa) | 6 |
- 1. Before construction, the gaps and surrounding areas should be kept dry and not in contact with moisture;
- 2. To ensure uniform mixing of rubber components, it is recommended to discard the first 30cm rubber material extruded;
- 3. When the ambient temperature is low, the product will not easily extrude due to thickening. Soak in hot water at around 50 ℃ for 15 minutes in advance or heat at 40 ℃ for 10 minutes under safe conditions before use;
- 4. Low ambient temperature will prolong the curing time of the adhesive;
- 5. It is recommended to continuously construct a single product until it is used up. If the gap between the use of a single product exceeds 20 minutes, the static mixing nozzle needs to be replaced;
- 6. The unused support adhesive should be promptly removed from the old static mixing nozzle. Keep the rubber bottle properly and install a new static mixing nozzle before next use before continuing to use;
- 7. Construction personnel should take personal protective measures. If the adhesive accidentally comes into contact with the skin or eyes, they should immediately rinse with plenty of water and seek medical attention promptly.
Please refer to the color palette for standard colors. For more colors, please contact your local sales representative. The sewing agent is provided to customers in 200ML plastic tube packaging for A and B.
The original packaging is stored in a dry and ventilated environment with a temperature of 30 ℃ or lower, and the shelf life is 12 months from the date of production.